Shorya Ventilator
Category: Global Medicare
Related products
Auto CPAP
BM 850 Respiratory humidifier
Fetal Doppler
Instructions Sonoline B Pocket Fetal Doppler is a hand-held obstetrical unit, which can be used in hospital, clinic and home for daily self-check by pregnant woman. Fetal doppler Contains components of ultrasonic signal transmitter and receiver, analog signals processing unit, FHR calculating unit, LCD display control unit etc. Sonoline B Pocket Fetal Doppler is a high performance model with (fetal heart rate) LCD digital display. It has 3 work modes: Real-time FHR display Mode, averaged FHR display mode, and manual mode. It has audio output and can be connected with earphone or recorder with audio input. Main Features -Battery status indicator -Low power inspection of the battery -Built-in speaker -Output for headphones -The probe can be changeable -Probe inspection -Backlight -Auto shut off -Support 2MHz, 3MHz, 4MHz, 5MHz, 8MHz probes -Two pieces of standard 1.5V alkaline battery available which can work no less than 10 hours Main performance. Anti-electroshock Type: Internally powered equipment 2.Anti-electroshock Degree: Type B applied part 3.LCD Display: 45 mm × 25 mm 4.FHR Measuring Range: 50 BPM ~ 240 BPM (BPM: Beat per minute) 5.Resolution: 1 BPM 6.Accuracy: ± 2 BPM 7.Power Consumption: < 0.8 W 8.Voltage: DC 3.0 V 9.Power Supply: TWO 1.5V(AA size)alkaline battery 10.Suitable Using Range: Suitable for use after the 12th week of pregnancy 11.Auto Shut-OFF: After 1 minute no signal, power off automatically Pocket Fetal doppler Probe: 1.Nominal Frequency: 2.0 MHz 2.Working Frequency: 2.0 MHz ± 10% 3.Ultrasound Output Power: P < 10 mW 4.Ultrasonic Output Intensity: Isata < 5 mW/cm2 5.Negative Peak Sound Pressure: P_ < 0.5 MPa 6.Working Mode: Continuous wave doppler Effective Radiating Area of Transducer: 208 mm2 ± 15% Physical Characteristic Dimension: (L) 135 mm × (W) 95mm × (H ) 35 mm Qualification Sonoline B:Pocket Fetal Doppler-CE/FDA
LTV 950 Transport ventilator
Multipara Patient Monitors
-
- 12-inch high-resolution color TFT LCD display
-
- Full touch screen selectable, more convenient for operation
-
- Real-time S-T segment analysis, pacemaker detection
-
- 3-level audio/visual alarms
-
- Efficient resistance to interference of defibrillator and HF knife
-
- Lasting working capability with built-in rechargeable lithium battery
-
- 400 groups of NIBP list, 6000 seconds ECG waveform recall, 60 alarm event record, 7-day trend chart in storage
-
- Wireless central monitoring system applicable to ICU/CCU/OR
-
- Support solution: wall mounting, mobile trolley
-
- Size: 12 * 11.3 * 6.3 inchWeight: 8.33 lb Electrical Specification: 100-240v AC, 50/60Hz, Max Input Power: 70VA Battery: 11.1V 4000mAh rechargeable lithium battery Standard configuration: SpO2, PR, NIBP, ECG, RESP, TEMP Optional Configuration: Nellcor SpO2, 2-IBP, ETCO2, Touch screen, Built-in Thermal Printer
-
- Package Include:1 x E12 device 1 x Li-Battery 1 x Power line 1 x Earth wire 1 x User’s Manual 1 x Blood oxygen probe (for SpO2, PR) 1 x Blood pressure cuff (for NIBP) 1 x ECG cable (for ECG, RESP) 1 x Temperature probe (for Temperature)
Non Invasive Ventilation (HFNC)
Ventilator replacement :
Medical device treatment : In addition to drug treatment, respiratory support treatments relying on medical devices, such as oxygen therapy, invasive mechanical ventilation, extracorporeal membrane oxygenation (ECMO), and circulatory support are much helpful to those the most serious cases of coronavirus pneumonia. It also play important role in treatment of critically ill patients.
As there is no enough ventilators, please allow us to introduce our high flow oxygen blender . It is very useful in early infection cases and the recovery patients from critical stage.
Simple to operate:
The o2 % can be adjust by knob.
The flow can adjust from flow meter.
Reviews
There are no reviews yet.