L8M6/L8M9 Fetal Monitor Monitor

Specification 1. Oxygen flow rate : 1-5LPM/MIN 2. Oxygen Concentration : 93%+3% 3. Outlet pressure : 8.5-13 psi 4. Voltage : 230V;50hz 5. Power Consumption : 320W 6. Noise :<48dB(A) 7. Wight : 16 KG. 8. Nozzle : 1 9. Size : 305mm (L) x330 mm (W) x 535 mm (H) Function 1. Running time control & calculation 2. Alarms for high/low pressure, power failure and Gas blockage. 3. Protection for over-heat and over-load. 4. Purity alarm when the oxygen purity below 82% (Optional) 5. Medical nebulization by output oxygen dual Output.

Powerful and optimal ventilation modes The Dual PAP ventilation mode is able to provide the patient with biphasic horizontal pressure (high pressure phase and low pressure phase). With the suitable pressure, this perfect modes not only exercises the patient's breathing muscles, but also reduces the reliance on the ventilator. Freeflow is an advanced closed-loop control technology with square wave pattern and decelerating flow pattern. Under the square wave pattern, the patient is able to breathe spontaneously in the inspiratory phase, while under the decelerating flow pattern, the system is able to adjust the flow rate according to the patient's compliance and resistance changes. It means this advanced mode greatly reducing the use of sedatives and muscle relaxants, and has obvious effects on patients with atelectasis, ARDS, acute pulmonary edema, and asthma. Comprehensive and visible monitoring function With 15 inch color touch screen, the Boaray 5000D is able to show 4 waveforms and 2 loops simultaneously. And it can monitor more than 20 important parameters to help you know the patient status in    anytime. Free breathing technology for breathing freely The free breathing technology can release excessive pressure caused by a cough or active exhalation, to ensure patient safety and make breathing more comfortable. Features: Vt range: 20-2000ml; Applicable to adult, pediatric and infant Ventilation modes: VCV, PCV, SIMV(P)+PS, SIMV(V)+PS, SPONT/CPAP, Sigh, PRVC, DualPAP, NPPV, Manual, Standby Weaning parameter (RSB, P0.1, NIF) 15 inch TFT touch screen & big front view for easy observation Simultaneous display of 4 waveforms and 2 loops CO2 and SpO2 monitoring (optional) Synchronized nebulizer and air compressor (optional) Expiratory valve could be taken off for autoclavable disinfection to avoid cross-infection Active exhalation valve with anti-condensation design World leading brands of key components of ventilator ensure high accuracy and stable performance Advanced proportional solenoid technology realize accurate ventilation control Multi-safety mechanism and three-priority alarm of visual and audio for different risks

Medical Air compressor for ventilator and bubble cpap Compact & Modular Design having dimension 13.5” x 13”x 18.5” (LxWxH) Quiet Operation, suitable for bedside use Delivers a Flow of 50 + 10 lpm @ 25 + 5 psig Oil-free compressor motor with thermal cutout Optional digital display with alarms for added safety Optional Electronic Dryer Optional Low-Flow Model available Large locking castors for easy transport Having all international approvals & certifications – CE, IEC, etc

Application Range: Adult/Pediatric/Neonatal/Medicine/Surgery Operating Room/lCU/CCU Display: 8’’real color TFT screen Resolution:800*600 One alarm indicator(yellow/red) One working indicator(green) One battery charge state indicator(green) Three modes in accordance with the alarm state Power Requirements: AC:100-240V,50Hz/60Hz DC:Built-in rechargeable battery Battery:4000mA 11.1V lithium battery 2hoperatingafter full charge one piece)