Infant Warmer

Infant Warmer

OPERATING MODES

  • SKINMODE:

In Skin mode heater power is controlled with reference to Skin probe. In case when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off.

· AIR MODE:

In Air mode heater power is controlled with reference to Air probe. In case when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off.

· MANUAL: MODE

In manual mode user can control heater manually. In this mode user can adjust heating speed (0 to 8 speed) and set timer upto 59min. With probes installed when the temperature exceeds Max ( 38 °C or 10

Category:

DISPLAY INDICATION

  • LCD:

LCD displays the following information.

  1. CurrentMode
  2. Heatingspeed
  • Alerts:Low Temp, High Temp, Probe fail
  1. Settings:Set Temp, Low Alarm, High Alarm, Manual mode timer, Calibration, Product branding
  2. APGARtimer

· 7 SEGMENT DISPLAY:

Displays current Skin and Air temperature, blinks for out of range (Low and high alarm) and clears upon probe fail.

ALERTS

  • Powerfail: Power fail indicator turns ON with sound alert (cannot be muted).
  • Probefail: Probe fail indicator turns ON with sound alert (can be muted). Displays “-.-.-“on temp
  • Heateroverload: Heater overload indicator turns
  • Low temperature:Low alarm indicator turns ON with sound alert (can be muted). Displays
  • Hightemperature: High alarm indicator turns ON with sound alert (can be muted). Displays
  • Manualmode Time out: Short sound alert and timer flashing on

IMPORTANT INSTRUCTIONS

We recommend that you read the following instruction carefully, before using the machine/Equipment

  • Supplyvoltage should be between 220V-240V
  • Donot use the machine/Equipment when the mains cord, the plug or other components are damaged.
  • Themachine/Equipment should be handled by authorized person
  • Donot clean machine/Equipment with water or other cleaning
  • Checkheater and probe before using the
  • Donot leave baby unattended for long
  • Werecommend to use 650W
  • Newprobes or replacement probe should be calibrated before

Neonatal Pulse Oximeter/optional:

Pcb Design : BAMC Medical

Display  : 2” colour TFT

SpO2 measurement range 35%~100%
SpO2 measurement Accuracy ±2%(70%~100%)
SpO2 resolution 1%
PR measurement range 30~250bpm
PR measurement Accuracy The greater of ±2bpm
PR resolution 1%
Low perfusion performance 0.025%
Oximeter accuracy of ±2% and pulse rate accuracy of ±2bpm under 0.025% weak perfusion conditions
Anti-motion interference performance SpO2 measurement accuracy ±3% and pulse rate measurement accuracy ±4bpm at 0-4Hz, 0-3cm random motion or fixed frequency motion
Breathing measurement Optional
Initial output time 4s
Probe off detection Yes
Probe failure detection Yes
perfusion Index 0.02%~20%
Pulse wave Yes
Board size 32mm*18mm*3mm
Wiring methods Pad
Power supply 5V DC
Power consumption <15mA
Application Adult / Pediatric / Neonatal
Work environment temperature:0~40℃,humidity:15%~95% atmospheric pressure:79.5kPa~107.4kPa
Storage environment temperature:-20~60℃,humidity:15%~95% Non-condensing
,atmospheric pressure:79.5kPa~107.4kPa

Reviews

There are no reviews yet.

Be the first to review “Infant Warmer”

Your email address will not be published. Required fields are marked *