Auto CPAP
-
- BIPAP with humidifier
-
- modes : auto cpap ,bipap,st,s,t
-
- pressure 1-30
-
- ce approved
-
- humidity control
-
- easy to handle and 2 years warranty
-
- sleep report software and memory card included
-
- with all accessories and bag.
Reviews (0)
Shipping & Delivery
Related products
5L Home Use Oxygen Concentrator
Specification 1. Oxygen flow rate : 1-5LPM/MIN 2. Oxygen Concentration : 93%+3% 3. Outlet pressure : 8.5-13 psi 4. Voltage : 230V;50hz 5. Power Consumption : 320W 6. Noise :<48dB(A) 7. Wight : 16 KG. 8. Nozzle : 1 9. Size : 305mm (L) x330 mm (W) x 535 mm (H) Function 1. Running time control & calculation 2. Alarms for high/low pressure, power failure and Gas blockage. 3. Protection for over-heat and over-load. 4. Purity alarm when the oxygen purity below 82% (Optional) 5. Medical nebulization by output oxygen dual Output.
Endoscopy LED Light Source
1. High brightness is comparable to 350W traditional xenon light source, could be used for laparoscopy without any problem. 2. Long life, it could last 60000 hours max, 120times of xenon, so you do not need to replace the bulb for years. 3. Wide range power from 100-240V/AC; 50/60 Hz. 4. Perfect color temperature 600K to 6500K, color rendering is over 70. 5. Does not emit light in U or IR. 6. Customized connector, it accepts fiber light guides with active areas ranging from 3 mm to 10 mm diameter. 7. It saves energy for more than 50%. 8. Environmentally friendly. 9. Friendly design, easy operation
Multipara Patient Monitors
-
- 12-inch high-resolution color TFT LCD display
-
- Full touch screen selectable, more convenient for operation
-
- Real-time S-T segment analysis, pacemaker detection
-
- 3-level audio/visual alarms
-
- Efficient resistance to interference of defibrillator and HF knife
-
- Lasting working capability with built-in rechargeable lithium battery
-
- 400 groups of NIBP list, 6000 seconds ECG waveform recall, 60 alarm event record, 7-day trend chart in storage
-
- Wireless central monitoring system applicable to ICU/CCU/OR
-
- Support solution: wall mounting, mobile trolley
-
- Size: 12 * 11.3 * 6.3 inchWeight: 8.33 lb Electrical Specification: 100-240v AC, 50/60Hz, Max Input Power: 70VA Battery: 11.1V 4000mAh rechargeable lithium battery Standard configuration: SpO2, PR, NIBP, ECG, RESP, TEMP Optional Configuration: Nellcor SpO2, 2-IBP, ETCO2, Touch screen, Built-in Thermal Printer
-
- Package Include:1 x E12 device 1 x Li-Battery 1 x Power line 1 x Earth wire 1 x User’s Manual 1 x Blood oxygen probe (for SpO2, PR) 1 x Blood pressure cuff (for NIBP) 1 x ECG cable (for ECG, RESP) 1 x Temperature probe (for Temperature)
Non Invasive Ventilation (HFNC)
Ventilator replacement :
Medical device treatment : In addition to drug treatment, respiratory support treatments relying on medical devices, such as oxygen therapy, invasive mechanical ventilation, extracorporeal membrane oxygenation (ECMO), and circulatory support are much helpful to those the most serious cases of coronavirus pneumonia. It also play important role in treatment of critically ill patients.
As there is no enough ventilators, please allow us to introduce our high flow oxygen blender . It is very useful in early infection cases and the recovery patients from critical stage.
Simple to operate:
The o2 % can be adjust by knob.
The flow can adjust from flow meter.
Reviews
There are no reviews yet.