Reviews (0)
Shipping & Delivery
Related products
5L Home Use Oxygen Concentrator
Specification 1. Oxygen flow rate : 1-5LPM/MIN 2. Oxygen Concentration : 93%+3% 3. Outlet pressure : 8.5-13 psi 4. Voltage : 230V;50hz 5. Power Consumption : 320W 6. Noise :<48dB(A) 7. Wight : 16 KG. 8. Nozzle : 1 9. Size : 305mm (L) x330 mm (W) x 535 mm (H) Function 1. Running time control & calculation 2. Alarms for high/low pressure, power failure and Gas blockage. 3. Protection for over-heat and over-load. 4. Purity alarm when the oxygen purity below 82% (Optional) 5. Medical nebulization by output oxygen dual Output.
Anesthesia Ventilator
Respiration mode - IPPV / Manual I:E ratio - 4:1- 1:6 Tidal Volume - 50ml ~1600ml Respiratory frequency - 1~90bpm PEEP - NO Waveform - NO Patient type - Adult, pediatric Display - High light LED display Driven mode - Pneumatically driven electronically controlled Gas supply - O2 or Medical Air Gas Supply pressure - 0.27-0.55 MPa Monitor parameter Tidal volume Minute ventilation Breath frequency I:E ratio Alarm Tidal volume high alarm Tidal volume low alarm Minute ventilation high alarm Minute ventilation low alarm
Endoscopy LED Light Source
1. High brightness is comparable to 350W traditional xenon light source, could be used for laparoscopy without any problem. 2. Long life, it could last 60000 hours max, 120times of xenon, so you do not need to replace the bulb for years. 3. Wide range power from 100-240V/AC; 50/60 Hz. 4. Perfect color temperature 600K to 6500K, color rendering is over 70. 5. Does not emit light in U or IR. 6. Customized connector, it accepts fiber light guides with active areas ranging from 3 mm to 10 mm diameter. 7. It saves energy for more than 50%. 8. Environmentally friendly. 9. Friendly design, easy operation
Medical Dry Air Compressor
Medical Air compressor for ventilator and bubble cpap Compact & Modular Design having dimension 13.5” x 13”x 18.5” (LxWxH) Quiet Operation, suitable for bedside use Delivers a Flow of 50 + 10 lpm @ 25 + 5 psig Oil-free compressor motor with thermal cutout Optional digital display with alarms for added safety Optional Electronic Dryer Optional Low-Flow Model available Large locking castors for easy transport Having all international approvals & certifications – CE, IEC, etc
Non Invasive Ventilation (HFNC)
Ventilator replacement :
Medical device treatment : In addition to drug treatment, respiratory support treatments relying on medical devices, such as oxygen therapy, invasive mechanical ventilation, extracorporeal membrane oxygenation (ECMO), and circulatory support are much helpful to those the most serious cases of coronavirus pneumonia. It also play important role in treatment of critically ill patients.
As there is no enough ventilators, please allow us to introduce our high flow oxygen blender . It is very useful in early infection cases and the recovery patients from critical stage.
Simple to operate:
The o2 % can be adjust by knob.
The flow can adjust from flow meter.
Reviews
There are no reviews yet.