BM 850 Respiratory humidifier
-
- Respiratory Humidifier for icu and transport ventilators
-
- can use with bubble cpap
-
- fully automatic
-
- servo control humidifier
-
- with heater wire adapter and temp. probe
-
- 2 years warranty
Category: Global Medicare
Related products
Air O2 Blender
Auto CPAP
Endoscopy LED Light Source
1. High brightness is comparable to 350W traditional xenon light source, could be used for laparoscopy without any problem. 2. Long life, it could last 60000 hours max, 120times of xenon, so you do not need to replace the bulb for years. 3. Wide range power from 100-240V/AC; 50/60 Hz. 4. Perfect color temperature 600K to 6500K, color rendering is over 70. 5. Does not emit light in U or IR. 6. Customized connector, it accepts fiber light guides with active areas ranging from 3 mm to 10 mm diameter. 7. It saves energy for more than 50%. 8. Environmentally friendly. 9. Friendly design, easy operation
Fetal Doppler
Instructions Sonoline B Pocket Fetal Doppler is a hand-held obstetrical unit, which can be used in hospital, clinic and home for daily self-check by pregnant woman. Fetal doppler Contains components of ultrasonic signal transmitter and receiver, analog signals processing unit, FHR calculating unit, LCD display control unit etc. Sonoline B Pocket Fetal Doppler is a high performance model with (fetal heart rate) LCD digital display. It has 3 work modes: Real-time FHR display Mode, averaged FHR display mode, and manual mode. It has audio output and can be connected with earphone or recorder with audio input. Main Features -Battery status indicator -Low power inspection of the battery -Built-in speaker -Output for headphones -The probe can be changeable -Probe inspection -Backlight -Auto shut off -Support 2MHz, 3MHz, 4MHz, 5MHz, 8MHz probes -Two pieces of standard 1.5V alkaline battery available which can work no less than 10 hours Main performance. Anti-electroshock Type: Internally powered equipment 2.Anti-electroshock Degree: Type B applied part 3.LCD Display: 45 mm × 25 mm 4.FHR Measuring Range: 50 BPM ~ 240 BPM (BPM: Beat per minute) 5.Resolution: 1 BPM 6.Accuracy: ± 2 BPM 7.Power Consumption: < 0.8 W 8.Voltage: DC 3.0 V 9.Power Supply: TWO 1.5V(AA size)alkaline battery 10.Suitable Using Range: Suitable for use after the 12th week of pregnancy 11.Auto Shut-OFF: After 1 minute no signal, power off automatically Pocket Fetal doppler Probe: 1.Nominal Frequency: 2.0 MHz 2.Working Frequency: 2.0 MHz ± 10% 3.Ultrasound Output Power: P < 10 mW 4.Ultrasonic Output Intensity: Isata < 5 mW/cm2 5.Negative Peak Sound Pressure: P_ < 0.5 MPa 6.Working Mode: Continuous wave doppler Effective Radiating Area of Transducer: 208 mm2 ± 15% Physical Characteristic Dimension: (L) 135 mm × (W) 95mm × (H ) 35 mm Qualification Sonoline B:Pocket Fetal Doppler-CE/FDA
ICU Equipments service n Spare parts
BIGGEST SERVICE CENTRE ACROSS INDIA We BAMC Medical Public Ltd also known as global medicare panipat. With manufacturing of medical equipments we also provide service and spare parts for the many reputed brand for example Drager, Maquet, GE, Hamilton, carefusion, Datascope, Global Medicare, BAMC Medical, Contec, mindray, etc. We have all over around 4500 dealers across India and 700 customers out of India .
Multipara Patient Monitors
-
- 12-inch high-resolution color TFT LCD display
-
- Full touch screen selectable, more convenient for operation
-
- Real-time S-T segment analysis, pacemaker detection
-
- 3-level audio/visual alarms
-
- Efficient resistance to interference of defibrillator and HF knife
-
- Lasting working capability with built-in rechargeable lithium battery
-
- 400 groups of NIBP list, 6000 seconds ECG waveform recall, 60 alarm event record, 7-day trend chart in storage
-
- Wireless central monitoring system applicable to ICU/CCU/OR
-
- Support solution: wall mounting, mobile trolley
-
- Size: 12 * 11.3 * 6.3 inchWeight: 8.33 lb Electrical Specification: 100-240v AC, 50/60Hz, Max Input Power: 70VA Battery: 11.1V 4000mAh rechargeable lithium battery Standard configuration: SpO2, PR, NIBP, ECG, RESP, TEMP Optional Configuration: Nellcor SpO2, 2-IBP, ETCO2, Touch screen, Built-in Thermal Printer
-
- Package Include:1 x E12 device 1 x Li-Battery 1 x Power line 1 x Earth wire 1 x User’s Manual 1 x Blood oxygen probe (for SpO2, PR) 1 x Blood pressure cuff (for NIBP) 1 x ECG cable (for ECG, RESP) 1 x Temperature probe (for Temperature)

Reviews
There are no reviews yet.